For sales or further information call +44 (0)1684 773860 or email sales@aqua-dock.co.uk
Half-depth module for applications requiring a lower freeboard than standard, for example rowing and canoe clubs to facilitate easier entry and exit as the top surface sits closer to the water.
Also can be used to create steps and bridges.
483mm x 483mm x 230mm (19" x 19" x 9"0)
Weight: 6,000 gms (13.2 lbs)
We have a range of accessories for your floating pontoons such as fenders, dock cushions, mooring rings, cleats, life buoys, post holders, hand rails...
View float accessories“Fed up with anti-fouling my speed boat, I looked for a cost effective way of keeping my hull clean. Aqua-dock worked really well and when my moorings changed, I just unbolted the dock and reconfigured it to fit my new moorings. Easy to use and very effective at keeping my hull out of the water, plus allowing easy and safe access around and to my boat. I would recommend Aqua-dock to any small boat owner.”
Grant Hardy – Private Mooring – Norfolk Broads
“I am delighted with my Aqua-dock. It allows me to keep my 5 meter RIB in a fully tidal creek in Cornwall, ready for use when there is only a few feet of water below it. It is so much better than launching the RIB when I want to use it or having to antifoul or keep cleaning off the barnacles. The delivery and installation service from Aqua-dock was excellent.”
Andy Mills – Cornwall“Once again many thanks for your unlimited time and efforts in achieving a successful installation for my Merry Fisher 625”
Roger W. – Roses, Spain.The pontoon is entirely successful. I used 8mm chain and 5kg Bruce anchors, lighter than your specification, but far less backbreaking to lift and check, and rock-solid even in the worst weather: gales with 80 mph gusts and three months locked in four inches of ice. The anchors were well bedded-in with the powerboat. We’ve found that heavy gear tends to skate, whereas the lighter anchors just dig deeper and deeper. If the pontoon can stand the strains of ninety acres of moving ice during the thaw, the load imposed by the dinghies (even a novice trying to fillet it with a Wayfarer) is minimal.
Doug Forbes – Bosun – Rossendale Valley Sailing ClubI purchased an Aqua-dock system for an 8 metre RIB. The product was available from stock and the Aqua-dock team installed the product quickly and efficiently. I am impressed by the modular design of the dock, and particularly the the inset roller system which allows the boat to be driven on and off the dock easily, without damage to the hull of the RIB. Equally impressive is the support from the Aqua-dock team, particularly the MD David Howard. David is a real hands on Managing Director who is fully engaged in your project from initial design through to ensuring you are happy with the finished product. “Great Product Great Service”
Ian Richards- Owner 8 Metre Cobra RIB
English
Français
Deutsch
Drive on Hull support Module
Double Float Module
Single Float Module
Single Module Float (Half Depth)
Sliding Nut
Spacer Disc
Standard Nut
External Connecting Pin
Internal Connecting Pin
Internal Connecting Pin – Double Length
Cleat
Hand Rail
Kick Plate
Assembly Tools
Moulded fenders
Mooring Ring
Dock Cushion